Web Installer

Flash the native HomeKit firmware to your Konnected GDO blaQ straight from your browser — no software to install.

Works withApple Home

GDO blaQ HomeKit firmware

Checking latest version…

Already running this firmware? Update without losing your WiFi, HomeKit pairing or settings →
Unsupported browser. Use Google Chrome or Microsoft Edge to flash over USB. Web Serial is blocked. This page needs to be loaded over HTTPS with Web Serial permitted.

Keeps your settings

Already running this firmware? Update without losing settings

The full install above erases your saved WiFi, HomeKit pairing and settings. To keep them, download the update file and upload it from the device's own diagnostics page instead.

Download update file (.bin)

  1. Open http://gdo-blaq.local:8080/ on the same network as the device, or http://<device-ip>:8080/ if that name doesn't resolve.
  2. In the Firmware section, choose the downloaded file and select Upload. Enter your admin password when asked.
  3. Check the version shown, then select Confirm & Reboot.

Use the file ending in -ota.bin. The larger konnected-… file is for a full USB install and won't work in the dashboard uploader.

After flashing: provision WiFi and add to HomeKit

  1. Connect to the device's konnected-blaq-hk WiFi access point.
  2. Open http://192.168.4.1, enter your WiFi credentials, and select Write and Reboot. The network name (SSID) and password are case-sensitive, so type them exactly as they appear on your router.
  3. Once the device joins your network, open Apple's Home app, select Add Accessory, then More Options.
  4. Select the accessory and enter setup code 251-02-023.

Troubleshooting / FAQ